Pixel.Mail.Ru
contact us
ru en
+7 495 249-29-39
working around-the-clock

Eco leather Oregon Strong BLACK color - buy online

Eco leather Oregon STRONG BLACK width 1,4m thickness 1mm

Eco leather Oregon STRONG BLACK
width 1,4m thickness 1mm

available in stock

this item is also available: with perforation

this item is also available: on foam rubber 5mm with mesh

this item is also available: on foam rubber 3mm and 5mm and spunbond

this item is also available: with perforation on foam rubber 5mm with mesh

this item is also available: with perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: on glue

SUMMARY OF ECO LEATHER OREGON:

  • roll width 1,4m, roll length 20m, material thickness 1mm
  • in a roll 20 lin. meters or 28 sq.m, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER:

  • Eco leather - artificial leather, which is a thin polyurethane film reinforced with a layer of polyurethane foam with a knitted backing.
  • Eco leather stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction.
  • If you need to hide irregularities and make the surface soft, then you need to order Eco leather or already triplated with foam rubber spunbond, or additionally use the first layer foam rubber of the required thickness.
  • Eco leather is pleasant to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Eco leather is breathable and breathable.
  • Eco leather is hygroscopic, that is, it absorbs water vapour.
  • Eco leather is non-allergenic, because does not stand out from itself during operation.

WHAT IS THE ECO LEATHER DIFFERENT BETWEEN:

  • All Eco leathers presented on our website are of very good quality and are used in different areas. The more expensive Eco leather is, the better it is. We suggest you first purchase catalogs with samples of Eco leather you need with a 40% discount, choose the most suitable Eco leather in color, texture and quality, and then place an order on it.
  • Eco leather Oregon - the cheapest and most bought position from eco leather! Despite the price, Oregon Eco leather has good wear resistance, and in appearance is not inferior to expensive counterparts.
  • Space and Vega Eco leather - a novelty in the range of Eco leather for furniture. Similar in quality to Oregon faux leather.
  • Eco leather Alba and Art Vision - high-quality Eco leather for furniture, which is also widely used in auto-tuning. The unique finish gives the material additional qualities that expand its design possibilities. Eco leather with good hygienic and performance properties, providing maximum comfort. The material is lightfast, breathable, highly resistant to repeated bending, abrasion and scratch resistance. It is used for sewing car covers and car seats.
  • Eco leather Cordoba is a new high-tech type of Eco leather. Like any other Eco leather, this material in its appearance and tactile properties is as close as possible to natural leather. The main feature of Eco leather Cordova is the special EASY CLEAN coating, which provides easy cleaning from most household dirt, including traces of ballpoint pens. To remove ink, simply rub the skin with a regular paper towel. That is why Eco leather Cordova is perfect for upholstering furniture, upholstering a car interior and sewing high-quality car seat covers. In terms of its performance characteristics, Eco leather Cordova is noticeably superior to Eco leather Oregon, but still inferior in strength Eco leather on microfiber.
  • Eco leather Crete - high-tech artificial leather with increased wear resistance: up to 200,000 Martindale test cycles. This is several times more than that of budget Eco leather and, in fact, in terms of wear resistance, it corresponds to Eco leather on microfiber. Topics no less Eco leather Crete does not have a microfiber backing, so it is not so resistant to cuts and mechanical damage. Scope of Eco leather Crete: upholstery of car interiors, home, industrial and public furniture.
  • Eco leather Companion differs from Eco leather Oregon, Alba and Art Vision in a more wear-resistant and durable polyurethane film in the front layer, which is super scratch resistant. Eco leather Companion has the same front layer as Eco Microfiber leather, but differs in that the polyurethane film is applied not on microfiber, but on polyurethane foam with a fleece fabric backing. If the Eco Microfiber leather is used for the complete constriction of the car interior seats, then the Eco leather Companion is mainly used for upholstery of the seat backs, for sewing covers and the constriction of not very curved parts of the car interior.
  • Eco leather Stretch is distinguished by its softness and plasticity, which allows it to be used when sewing outerwear - jackets, raincoats, and also suits, skirts, trousers. It is also widely used for sewing handbags and accessories.
  • Of the entire range of faux leather, only eco leather Oregon and eco microfiber leather are available in perforated versions.

ECO LEATHER APPLICATION:

  • Eco leather is mainly used for sewing seat covers and upholstery for passenger cars, minibuses, buses, truck seats and various special equipment.
  • It is used for binding door cards, gear lever, podium, acoustic shelf, car interior panel elements.
  • Attention, in 90% of cases, tuning studio masters use Eco Microfiber leather for professional upholstery of seats and door cards of the car interior. It has the same thickness as genuine leather in skins, and the quality and variety of colors and textures of Eco Microfiber leather are unmatched!
  • If you need to upholstery the steering wheel or gear stick, we recommend using the SW for steering wheels series. Eco microfiber leather Schweitzer BMW, Schweitzer Nappa and Dakota many craftsmen also use the steering wheel and gearshift knob to tighten, but on their own responsibility.
  • It is used for covering various skins in the cabin of a minibus, bus, in the cab of trucks and various special equipment.
  • Upholstery of furniture for the home.
  • Upholstery of office furniture.
  • Upholstery of children's furniture.
  • Upholstery of sports equipment.
  • Sewing toys.
  • Sewing handbags.

RECOMMENDATIONS FOR CAR SEATS UPHOLSTERY WITH ECO LEATHER:

  • Under any Eco leather it is necessary to putfoam rubber on a backing, which is desirable to stick to Eco leather when tightening the seats. For these purposes, we recommend using aerosol glue Fensol 60 Fentac Adhesives or Tuskbond.
  • Which foam to use, mesh or spunbond? Experts in the field of car seat upholstery recommend using foam rubber on a mesh, which is more durable than spunbond.
  • Eco leather for the middle inserts of the back and seat, as a rule, is duplicated with foam rubber on a 10mm mesh, and the side support elements of the back and seat - with foam rubber on a 5mm mesh.
  • For your convenience, the range of Eco leather on our website contains Eco leather Oregon on foam rubber with a backing. Foam rubber with a backing in the form of a mesh or spunbond is already glued to the Oregon Eco leather by the glue method, which allows you to immediately use the sandwich when tightening, and not stick the foam to the Eco leather.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$6.99
price per lin. meter
ширина 1,4м
$4.66
price per lin. meter
Sale in linear meters
Sale in rolls
$88.5
price per small roll
20пог.м
$167.68
price per roll
40пог.м
Eco leather Oregon SUPER STRONG BLACK width 1,4m thickness 1,2mm

Eco leather Oregon SUPER STRONG
BLACK width 1,4m thickness 1,2mm

available in stock

this item is also available: with perforation

this item is also available: without perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: with perforation on foam rubber 3mm and 5mm and spunbond

SUMMARY OF ECO LEATHER OREGON:

  • roll width 1,4m, material thickness 1,2mm, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER:

  • Eco leather - artificial leather, which is a thin polyurethane film reinforced with a layer of polyurethane foam with a knitted backing.
  • Eco leather stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction.
  • If you need to hide irregularities and make the surface soft, then you need to order Eco leather or already triplated with foam rubber spunbond, or additionally use the first layer foam rubber of the required thickness.
  • Eco leather is pleasant to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Eco leather is breathable and breathable.
  • Eco leather is hygroscopic, that is, it absorbs water vapour.
  • Eco leather is non-allergenic, because does not stand out from itself during operation.

WHAT IS THE ECO LEATHER DIFFERENT BETWEEN:

  • All Eco leathers presented on our website are of very good quality and are used in different areas. The more expensive Eco leather is, the better it is. We suggest you first purchase catalogs with samples of Eco leather you need with a 40% discount, choose the most suitable Eco leather in color, texture and quality, and then place an order on it.
  • Eco leather Oregon - the cheapest and most bought position from eco leather! Despite the price, Oregon Eco leather has good wear resistance, and in appearance is not inferior to expensive counterparts.
  • Space and Vega Eco leather - a novelty in the range of Eco leather for furniture. Similar in quality to Oregon faux leather.
  • Eco leather Alba and Art Vision - high-quality Eco leather for furniture, which is also widely used in auto-tuning. The unique finish gives the material additional qualities that expand its design possibilities. Eco leather with good hygienic and performance properties, providing maximum comfort. The material is lightfast, breathable, highly resistant to repeated bending, abrasion and scratch resistance. It is used for sewing car covers and car seats.
  • Eco leather Cordoba is a new high-tech type of Eco leather. Like any other Eco leather, this material in its appearance and tactile properties is as close as possible to natural leather. The main feature of Eco leather Cordova is the special EASY CLEAN coating, which provides easy cleaning from most household dirt, including traces of ballpoint pens. To remove ink, simply rub the skin with a regular paper towel. That is why Eco leather Cordova is perfect for upholstering furniture, upholstering a car interior and sewing high-quality car seat covers. In terms of its performance characteristics, Eco leather Cordova is noticeably superior to Eco leather Oregon, but still inferior in strength Eco leather on microfiber.
  • Eco leather Crete - high-tech artificial leather with increased wear resistance: up to 200,000 Martindale test cycles. This is several times more than that of budget Eco leather and, in fact, in terms of wear resistance, it corresponds to Eco leather on microfiber. Topics no less Eco leather Crete does not have a microfiber backing, so it is not so resistant to cuts and mechanical damage. Scope of Eco leather Crete: upholstery of car interiors, home, industrial and public furniture.
  • Eco leather Companion differs from Eco leather Oregon, Alba and Art Vision in a more wear-resistant and durable polyurethane film in the front layer, which is super scratch resistant. Eco leather Companion has the same front layer as Eco Microfiber leather, but differs in that the polyurethane film is applied not on microfiber, but on polyurethane foam with a fleece fabric backing. If the Eco Microfiber leather is used for the complete constriction of the car interior seats, then the Eco leather Companion is mainly used for upholstery of the seat backs, for sewing covers and the constriction of not very curved parts of the car interior.
  • Eco leather Stretch is distinguished by its softness and plasticity, which allows it to be used when sewing outerwear - jackets, raincoats, and also suits, skirts, trousers. It is also widely used for sewing handbags and accessories.
  • Of the entire range of faux leather, only eco leather Oregon and eco microfiber leather are available in perforated versions.

ECO LEATHER APPLICATION:

  • Eco leather is mainly used for sewing seat covers and upholstery for passenger cars, minibuses, buses, truck seats and various special equipment.
  • It is used for binding door cards, gear lever, podium, acoustic shelf, car interior panel elements.
  • Attention, in 90% of cases, tuning studio masters use Eco Microfiber leather for professional upholstery of seats and door cards of the car interior. It has the same thickness as genuine leather in skins, and the quality and variety of colors and textures of Eco Microfiber leather are unmatched!
  • If you need to upholstery the steering wheel or gear stick, we recommend using the SW for steering wheels series. Eco microfiber leather Schweitzer BMW, Schweitzer Nappa and Dakota many craftsmen also use the steering wheel and gearshift knob to tighten, but on their own responsibility.
  • It is used for covering various skins in the cabin of a minibus, bus, in the cab of trucks and various special equipment.
  • Upholstery of furniture for the home.
  • Upholstery of office furniture.
  • Upholstery of children's furniture.
  • Upholstery of sports equipment.
  • Sewing toys.
  • Sewing handbags.

RECOMMENDATIONS FOR CAR SEATS UPHOLSTERY WITH ECO LEATHER:

  • Under any Eco leather it is necessary to putfoam rubber on a backing, which is desirable to stick to Eco leather when tightening the seats. For these purposes, we recommend using aerosol glue Fensol 60 Fentac Adhesives or Tuskbond.
  • Which foam to use, mesh or spunbond? Experts in the field of car seat upholstery recommend using foam rubber on a mesh, which is more durable than spunbond.
  • Eco leather for the middle inserts of the back and seat, as a rule, is duplicated with foam rubber on a 10mm mesh, and the side support elements of the back and seat - with foam rubber on a 5mm mesh.
  • For your convenience, the range of Eco leather on our website contains Eco leather Oregon on foam rubber with a backing. Foam rubber with a backing in the form of a mesh or spunbond is already glued to the Oregon Eco leather by the glue method, which allows you to immediately use the sandwich when tightening, and not stick the foam to the Eco leather.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$7.4
price per lin. meter
ширина 1,4м
$4.94
price per lin. meter
Sale in linear meters
Sale in rolls
$93.7
price per small roll
20пог.м
$177.54
price per roll
40пог.м
Eco leather Oregon STRONG with perforation BLACK width 1,4m thickness 1mm

Eco leather Oregon STRONG with perforation
BLACK width 1,4m thickness 1mm

available in stock

this item is also available: without perforation

this item is also available: without perforation on foam rubber 5mm and mesh

this item is also available: without perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: with perforation on foam rubber 5mm and mesh

this item is also available: with perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: without perforation on glue

SUMMARY OF ECO LEATHER OREGON:

  • roll width 1,4m, roll length 20m, material thickness 1mm
  • in a roll 20 lin. meters or 28 sq.m, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER:

  • Eco leather - artificial leather, which is a thin polyurethane film reinforced with a layer of polyurethane foam with a knitted backing.
  • Eco leather stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction.
  • If you need to hide irregularities and make the surface soft, then you need to order Eco leather or already triplated with foam rubber spunbond, or additionally use the first layer foam rubber of the required thickness.
  • Eco leather is pleasant to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Eco leather is breathable and breathable.
  • Eco leather is hygroscopic, that is, it absorbs water vapour.
  • Eco leather is non-allergenic, because does not stand out from itself during operation.

WHAT IS THE ECO LEATHER DIFFERENT BETWEEN:

  • All Eco leathers presented on our website are of very good quality and are used in different areas. The more expensive Eco leather is, the better it is. We suggest you first purchase catalogs with samples of Eco leather you need with a 40% discount, choose the most suitable Eco leather in color, texture and quality, and then place an order on it.
  • Eco leather Oregon - the cheapest and most bought position from eco leather! Despite the price, Oregon Eco leather has good wear resistance, and in appearance is not inferior to expensive counterparts.
  • Space and Vega Eco leather - a novelty in the range of Eco leather for furniture. Similar in quality to Oregon faux leather.
  • Eco leather Alba and Art Vision - high-quality Eco leather for furniture, which is also widely used in auto-tuning. The unique finish gives the material additional qualities that expand its design possibilities. Eco leather with good hygienic and performance properties, providing maximum comfort. The material is lightfast, breathable, highly resistant to repeated bending, abrasion and scratch resistance. It is used for sewing car covers and car seats.
  • Eco leather Cordoba is a new high-tech type of Eco leather. Like any other Eco leather, this material in its appearance and tactile properties is as close as possible to natural leather. The main feature of Eco leather Cordova is the special EASY CLEAN coating, which provides easy cleaning from most household dirt, including traces of ballpoint pens. To remove ink, simply rub the skin with a regular paper towel. That is why Eco leather Cordova is perfect for upholstering furniture, upholstering a car interior and sewing high-quality car seat covers. In terms of its performance characteristics, Eco leather Cordova is noticeably superior to Eco leather Oregon, but still inferior in strength Eco leather on microfiber.
  • Eco leather Crete - high-tech artificial leather with increased wear resistance: up to 200,000 Martindale test cycles. This is several times more than that of budget Eco leather and, in fact, in terms of wear resistance, it corresponds to Eco leather on microfiber. Topics no less Eco leather Crete does not have a microfiber backing, so it is not so resistant to cuts and mechanical damage. Scope of Eco leather Crete: upholstery of car interiors, home, industrial and public furniture.
  • Eco leather Companion differs from Eco leather Oregon, Alba and Art Vision in a more wear-resistant and durable polyurethane film in the front layer, which is super scratch resistant. Eco leather Companion has the same front layer as Eco Microfiber leather, but differs in that the polyurethane film is applied not on microfiber, but on polyurethane foam with a fleece fabric backing. If the Eco Microfiber leather is used for the complete constriction of the car interior seats, then the Eco leather Companion is mainly used for upholstery of the seat backs, for sewing covers and the constriction of not very curved parts of the car interior.
  • Eco leather Stretch is distinguished by its softness and plasticity, which allows it to be used when sewing outerwear - jackets, raincoats, and also suits, skirts, trousers. It is also widely used for sewing handbags and accessories.
  • Of the entire range of faux leather, only eco leather Oregon and eco microfiber leather are available in perforated versions.

ECO LEATHER APPLICATION:

  • Eco leather is mainly used for sewing seat covers and upholstery for passenger cars, minibuses, buses, truck seats and various special equipment.
  • It is used for binding door cards, gear lever, podium, acoustic shelf, car interior panel elements.
  • Attention, in 90% of cases, tuning studio masters use Eco Microfiber leather for professional upholstery of seats and door cards of the car interior. It has the same thickness as genuine leather in skins, and the quality and variety of colors and textures of Eco Microfiber leather are unmatched!
  • If you need to upholstery the steering wheel or gear stick, we recommend using the SW for steering wheels series. Eco microfiber leather Schweitzer BMW, Schweitzer Nappa and Dakota many craftsmen also use the steering wheel and gearshift knob to tighten, but on their own responsibility.
  • It is used for covering various skins in the cabin of a minibus, bus, in the cab of trucks and various special equipment.
  • Upholstery of furniture for the home.
  • Upholstery of office furniture.
  • Upholstery of children's furniture.
  • Upholstery of sports equipment.
  • Sewing toys.
  • Sewing handbags.

RECOMMENDATIONS FOR CAR SEATS UPHOLSTERY WITH ECO LEATHER:

  • Under any Eco leather it is necessary to putfoam rubber on a backing, which is desirable to stick to Eco leather when tightening the seats. For these purposes, we recommend using aerosol glue Fensol 60 Fentac Adhesives or Tuskbond.
  • Which foam to use, mesh or spunbond? Experts in the field of car seat upholstery recommend using foam rubber on a mesh, which is more durable than spunbond.
  • Eco leather for the middle inserts of the back and seat, as a rule, is duplicated with foam rubber on a 10mm mesh, and the side support elements of the back and seat - with foam rubber on a 5mm mesh.
  • For your convenience, the range of Eco leather on our website contains Eco leather Oregon on foam rubber with a backing. Foam rubber with a backing in the form of a mesh or spunbond is already glued to the Oregon Eco leather by the glue method, which allows you to immediately use the sandwich when tightening, and not stick the foam to the Eco leather.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$8.02
price per lin. meter
ширина 1,4м
$5.35
price per lin. meter
Sale in linear meters
Sale in rolls
$101.51
price per small roll
20пог.м
$192.33
price per roll
40пог.м
Eco leather Oregon SUPER STRONG with perforation BLACK width 1,4m thickness 1,2mm

Eco leather Oregon SUPER STRONG with perforation
BLACK width 1,4m thickness 1,2mm

available in stock, in the new arrival less pronounced structure of the front layer

this item is also available: without perforation

this item is also available: without perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: with perforation on foam rubber 3mm and 5mm and spunbond

SUMMARY OF ECO LEATHER OREGON:

  • roll width 1,4m, material thickness 1,2mm, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER:

  • Eco leather - artificial leather, which is a thin polyurethane film reinforced with a layer of polyurethane foam with a knitted backing.
  • Eco leather stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction.
  • If you need to hide irregularities and make the surface soft, then you need to order Eco leather or already triplated with foam rubber spunbond, or additionally use the first layer foam rubber of the required thickness.
  • Eco leather is pleasant to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Eco leather is breathable and breathable.
  • Eco leather is hygroscopic, that is, it absorbs water vapour.
  • Eco leather is non-allergenic, because does not stand out from itself during operation.

WHAT IS THE ECO LEATHER DIFFERENT BETWEEN:

  • All Eco leathers presented on our website are of very good quality and are used in different areas. The more expensive Eco leather is, the better it is. We suggest you first purchase catalogs with samples of Eco leather you need with a 40% discount, choose the most suitable Eco leather in color, texture and quality, and then place an order on it.
  • Eco leather Oregon - the cheapest and most bought position from eco leather! Despite the price, Oregon Eco leather has good wear resistance, and in appearance is not inferior to expensive counterparts.
  • Space and Vega Eco leather - a novelty in the range of Eco leather for furniture. Similar in quality to Oregon faux leather.
  • Eco leather Alba and Art Vision - high-quality Eco leather for furniture, which is also widely used in auto-tuning. The unique finish gives the material additional qualities that expand its design possibilities. Eco leather with good hygienic and performance properties, providing maximum comfort. The material is lightfast, breathable, highly resistant to repeated bending, abrasion and scratch resistance. It is used for sewing car covers and car seats.
  • Eco leather Cordoba is a new high-tech type of Eco leather. Like any other Eco leather, this material in its appearance and tactile properties is as close as possible to natural leather. The main feature of Eco leather Cordova is the special EASY CLEAN coating, which provides easy cleaning from most household dirt, including traces of ballpoint pens. To remove ink, simply rub the skin with a regular paper towel. That is why Eco leather Cordova is perfect for upholstering furniture, upholstering a car interior and sewing high-quality car seat covers. In terms of its performance characteristics, Eco leather Cordova is noticeably superior to Eco leather Oregon, but still inferior in strength Eco leather on microfiber.
  • Eco leather Crete - high-tech artificial leather with increased wear resistance: up to 200,000 Martindale test cycles. This is several times more than that of budget Eco leather and, in fact, in terms of wear resistance, it corresponds to Eco leather on microfiber. Topics no less Eco leather Crete does not have a microfiber backing, so it is not so resistant to cuts and mechanical damage. Scope of Eco leather Crete: upholstery of car interiors, home, industrial and public furniture.
  • Eco leather Companion differs from Eco leather Oregon, Alba and Art Vision in a more wear-resistant and durable polyurethane film in the front layer, which is super scratch resistant. Eco leather Companion has the same front layer as Eco Microfiber leather, but differs in that the polyurethane film is applied not on microfiber, but on polyurethane foam with a fleece fabric backing. If the Eco Microfiber leather is used for the complete constriction of the car interior seats, then the Eco leather Companion is mainly used for upholstery of the seat backs, for sewing covers and the constriction of not very curved parts of the car interior.
  • Eco leather Stretch is distinguished by its softness and plasticity, which allows it to be used when sewing outerwear - jackets, raincoats, and also suits, skirts, trousers. It is also widely used for sewing handbags and accessories.
  • Of the entire range of faux leather, only eco leather Oregon and eco microfiber leather are available in perforated versions.

ECO LEATHER APPLICATION:

  • Eco leather is mainly used for sewing seat covers and upholstery for passenger cars, minibuses, buses, truck seats and various special equipment.
  • It is used for binding door cards, gear lever, podium, acoustic shelf, car interior panel elements.
  • Attention, in 90% of cases, tuning studio masters use Eco Microfiber leather for professional upholstery of seats and door cards of the car interior. It has the same thickness as genuine leather in skins, and the quality and variety of colors and textures of Eco Microfiber leather are unmatched!
  • If you need to upholstery the steering wheel or gear stick, we recommend using the SW for steering wheels series. Eco microfiber leather Schweitzer BMW, Schweitzer Nappa and Dakota many craftsmen also use the steering wheel and gearshift knob to tighten, but on their own responsibility.
  • It is used for covering various skins in the cabin of a minibus, bus, in the cab of trucks and various special equipment.
  • Upholstery of furniture for the home.
  • Upholstery of office furniture.
  • Upholstery of children's furniture.
  • Upholstery of sports equipment.
  • Sewing toys.
  • Sewing handbags.

RECOMMENDATIONS FOR CAR SEATS UPHOLSTERY WITH ECO LEATHER:

  • Under any Eco leather it is necessary to putfoam rubber on a backing, which is desirable to stick to Eco leather when tightening the seats. For these purposes, we recommend using aerosol glue Fensol 60 Fentac Adhesives or Tuskbond.
  • Which foam to use, mesh or spunbond? Experts in the field of car seat upholstery recommend using foam rubber on a mesh, which is more durable than spunbond.
  • Eco leather for the middle inserts of the back and seat, as a rule, is duplicated with foam rubber on a 10mm mesh, and the side support elements of the back and seat - with foam rubber on a 5mm mesh.
  • For your convenience, the range of Eco leather on our website contains Eco leather Oregon on foam rubber with a backing. Foam rubber with a backing in the form of a mesh or spunbond is already glued to the Oregon Eco leather by the glue method, which allows you to immediately use the sandwich when tightening, and not stick the foam to the Eco leather.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$8.43
price per lin. meter
ширина 1,4м
$5.62
price per lin. meter
Sale in linear meters
Sale in rolls
$106.72
price per small roll
20пог.м
$202.2
price per roll
40пог.м
Eco leather on foam rubber 3mm (THREE!) and spunbond Oregon STRONG BLACK width 1,4m

Eco leather Oregon STRONG on foam rubber 3mm (THREE!)
and spunbond BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: with perforation without foam rubber

this item is also available: with spunbond 5mm and mesh 5mm

this item is also available: with perforation on foam rubber 5mm and mesh

this item is also available: with perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: without foam rubber on glue

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 3mm, leather thickness 1mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$9.66
price per lin. meter
ширина 1,4м
$6.44
price per lin. meter
Sale in linear meters
Sale in rolls
$122.33
price per small roll
20пог.м
$231.79
price per roll
40пог.м
Eco leather on foam rubber 3mm (THREE!!) and spunbond Oregon SUPER STRONG BLACK width 1,4m

Eco leather Oregon SUPER STRONG on foam rubber 3mm (THREE!!)
and spunbond BLACK width 1,4m

available 39 lin.m, arrival is expected at the end of May

in the new arrival less pronounced structure of the facial layer

this item is also available: without foam rubber

this item is also available: with perforation without foam rubber

this item is also available: on foam rubber 5mm and spunbond

this item is also available: with perforation on foam rubber 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 3mm, leather thickness 1,2mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$9.05
price per lin. meter
ширина 1,4м
$6.31
price per lin. meter
Sale in linear meters
Sale in rolls
$119.73
price per small roll
20пог.м
$226.85
price per roll
40пог.м
Eco leather on foam rubber 5mm and spunbond Oregon STRONG BLACK width 1,4m

Eco leather Oregon STRONG on foam rubber 5mm
and spunbond BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: with perforation without foam rubber

this item is also available: with spunbond 3mm and mesh 5mm

this item is also available: with perforation on foam rubber 5mm and mesh

this item is also available: with perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: without foam rubber on glue

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, thicknes of foam rubber with backing 5mm, leather thickness 1mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$10.48
price per lin. meter
ширина 1,4м
$6.99
price per lin. meter
Sale in linear meters
Sale in rolls
$132.74
price per small roll
20пог.м
$251.51
price per roll
40пог.м
Eco leather on foam rubber 5mm and spunbond Oregon SUPER STRONG BLACK width 1,4m

Eco leather Oregon SUPER STRONG on foam rubber 5mm
сand spunbond BLACK width 1,4m

not available, arrival is expected at the end of June

in the new arrival less pronounced structure of the facial layer

this item is also available: without foam rubber

this item is also available: with perforation without foam rubber

this item is also available: on foam rubber 3mm and spunbond

this item is also available: with perforation on foam rubber 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 5mm, leather thickness 1,2mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$9.32
price per lin. meter
ширина 1,4м
$6.58
price per lin. meter
Sale in linear meters
Sale in rolls
$124.94
price per small roll
20пог.м
$236.72
price per roll
40пог.м
Eco leather on foam rubber 5mm and mesh Oregon STRONG BLACK width 1,4m

Eco leather Oregon STRONG on foam rubber 5mm
and mesh BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: with perforation

this item is also available: with perforation without foam rubber

this item is also available: with spunbond 3mm and 5mm

this item is also available: with perforation and spunbond 3mm and 5mm

this item is also available: without foam rubber on glue

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 5mm, leather thickness 1mm
  • backing - mesh, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$11.51
price per lin. meter
ширина 1,4м
$7.68
price per lin. meter
Sale in linear meters
Sale in rolls
$145.76
price per small roll
20пог.м
$276.17
price per roll
40пог.м
Eco leather Oregon STRONG BLACK with perforation on foam rubber 3mm (THREE!!) and spunbond width 1,4m

Eco leather Oregon STRONG with perforation on foam rubber
3mm (THREE!) and spunbond BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: without perforation, without foam rubber

this item is also available: without perforation 5mm with spunbond and with mesh 5mm

this item is also available: on foam rubber and spunbond 5mm with spunbond and with mesh 5mm

this item is also available: without perforation и without foam rubber on glue

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 3mm, leather thickness 1mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$10.69
price per lin. meter
ширина 1,4м
$7.13
price per lin. meter
Sale in linear meters
Sale in rolls
$135.35
price per small roll
20пог.м
$256.44
price per roll
40пог.м
Eco leather Oregon SUPER STRONG BLACK with perforation on foam rubber 3mm (THREE!) and spunbond width 1,4m

Eco leather Oregon SUPER STRONG with perforation
on foam rubber 3mm (THREE!) and spunbond BLACK width 1,4m

available in stock, in the new arrival less pronounced structure of the facial layer

this item is also available: without foam rubber

this item is also available: without perforation, without foam rubber

this item is also available: with perforation on foam rubber 5mm

this item is also available: without perforation on foam rubber 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 3mm, leather thickness 1,2mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$9.59
price per lin. meter
ширина 1,4м
$6.85
price per lin. meter
Sale in linear meters
Sale in rolls
$130.14
price per small roll
20пог.м
$246.58
price per roll
40пог.м
Eco leather Oregon STRONG BLACK with perforation on foam rubber 5mm and spunbond width 1,4m

Eco leather Oregon STRONG with perforation
on foam rubber 5mm and spunbond BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: without perforation, without foam rubber

this item is also available: without perforation 3mm with spunbond and with mesh 5mm

this item is also available: on foam rubber 3mm with spunbond and with mesh 5mm

this item is also available: without perforation и without foam rubber on glue

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, thicknes of foam rubber with backing 5mm, leather thickness 1mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$11.51
price per lin. meter
ширина 1,4м
$7.68
price per lin. meter
Sale in linear meters
Sale in rolls
$145.76
price per small roll
20пог.м
$276.17
price per roll
40пог.м
Eco leather Oregon SUPER STRONG BLACK with perforation on foam rubber 5mm and spunbond width 1,4m

Eco leather Oregon SUPER STRONG with perforation
on foam rubber 5mm and spunbond BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: without perforation, without foam rubber

this item is also available: with perforation on foam rubber 3mm

this item is also available: without perforation on foam rubber 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 5mm, leather thickness 1,2mm
  • backing - spunbond, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$10
price per lin. meter
ширина 1,4м
$7.27
price per lin. meter
Sale in linear meters
Sale in rolls
$137.95
price per small roll
20пог.м
$261.37
price per roll
40пог.м
Eco leather Oregon STRONG BLACK with perforation on foam rubber 5mm and mesh width 1,4m толщина 6мм

Eco leather Oregon STRONG with perforation
на поролоне 5mm and mesh BLACK width 1,4m

available in stock

this item is also available: without foam rubber

this item is also available: without perforation

this item is also available: without perforation, without foam rubber

this item is also available: on foam rubber 3mm and 5mm and spunbond

this item is also available: without perforation on foam rubber 3mm and 5mm and spunbond

this item is also available: without perforation и without foam rubber on glue

SUMMARY OF ECO LEATHER OREGON ON FOAM RUBBER:

  • roll width 1,4m, foam rubber thickness with backing 5mm, leather thickness 1mm
  • backing - mesh, manufacturer China
  • for convenience we cut rolls of 20 lin.m or 28 sq.m
  • factory rolls are 40 lin.m or 56 sq.m
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING DESCRIPTION:

  • Eco leather Oregon on foam rubber with backing - is eco leather Oregon, duplicated with foam rubber with a spunbond or mesh backing. It is used for sewing car seat covers, decorative upholstering of parts and seats of cars interiors, minibuses, buses, boats and details of cabins of various special equipment. Also eco leather on foam rubber with a backing is used for upholstery furniture, sports equipment, sewing toys, making haberdashery products.
  • Eco leather on foam rubber with a backing stretches slightly in the transverse direction and practically does not stretch in the longitudinal direction. This is more than enough for sewing car seat covers and upholstering not very curved surfaces.
  • The main plus of eco leather on foam rubber with a backing is that when any surface is covered, all irregularities are smoothed out and the surface becomes soft to the touch.
  • If you need to hide irregularities and make the surface soft, and nothing suits you from the range of Oregon eco leather on foam rubber with a backing, then you can choose any eco leather from our assortment and order separately foam rubber 3mm, 5mm or 10mm thick. This foam rubber can be simply laid with the first layer under the eco leather of your choice, or glued to it using, for example, aerosol glue Fensol 60 Fentac Adhesives.
  • The foam rubber is reinforced with a backbone in the form of a spunbond or mesh, which, in addition to preventing the destruction of the foam rubber and reinforcing it, also does not allow the glue to be absorbed into the foam rubber when gluing eco leather on foam rubber, and therefore helps to stick it to the work surface with a minimum glue consumption.
  • Nice to the touch - soft, elastic. Its thermal conductivity properties are close to wood, leather, it is "warm".
  • Air and vapor permeable.
  • It is hygroscopic, i.e. it absorbs water vapor.
  • Non-allergenic, since it does not emit anything from itself during operation.

ECO LEATHER OREGON ON FOAM RUBBER WITH BACKING USAGE:

  • Eco leather Oregon on foam rubber is used in non-professional tuning as an inexpensive upholstery leather.
  • It is mainly used for sewing seat covers and hauling door cards for car interiors.
  • It is also possible to use it for upholstery parts of a car interior, in particular, for steering wheel, a gear knob, podiums, an acoustic shelf.
  • It is used for upholstery cabins of a minibuses, buses or in the cab of trucks and various special equipment.
  • It is used for upholstering the seats of motorcycles, ATVs, jet skis, bicycles.
  • Sports equipment upholstery.
  • Padding of furniture.
  • Sewing toys.

UPHOLSTERY METHODS WITH ECO LEATHER ON FOAM RUBBER WITH BACKING:

  • The front side of the detail is covered with eco leather on foam rubber with a bend on the inside. From the inside, eco leather on foam rubber is attached with a stapler.
  • A cover is sewn according to the shape of the detail. The finished cover is pulled over the detail and pulled together from the inside of the detail with rubber bands or ropes.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using aerosol glue.
  • Eco leather on foam rubber with a backing is glued to the surface of the detail using liquid glue.

GLUES FOR ECO LEATHER ON FOAM RUBBER WITH BACKING:

HOW TO GLUE ECO LEATHER ON FOAM RUBBER WITH BACKING CORRECTLY:

  • All the methods that are given below refer to the gluing of eco leather on foam rubber with a backing.
  • First you need to measure and cut off the required piece of material. Then it should be laid out on the surface to be pasted and the course of the gluing should be planned (take into account the phasing of the gluing, all surface bends, time intervals).
  • The surfaces to be bonded must be cleaned and dried.
  • Smooth plastic surfaces should preferably be sanded with fine sandpaper (grit 100) for better adhesion to the glue.
  • The working surface must be degreased with a thinner-cleaner Moleculeor others degreasers.
  • If the working surface is plastic with PP/PE marking or other markings, before applying glue, you need to treat such a surface with anti-siliconeandprimer on plastic, so that the glue does not peel off the plastic.
  • If some old material is already installed on the work surface, then it is up to you to rip it off or not. You can stick the new material directly onto the old material. We recommend that you try sticking on a small piece and decide whether to remove the old material or not.
  • DEPENDING ON THE ADHESIVE, THE METHOD OF GLUING IS DIFFERENT:
    • If you chose liquid glue Furniture, 88 or Molecule Heat Resistant, it is necessary to apply glue with a thin layer on both surfaces with a brush, roller or using a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), wait until the solvent partially disappears from the glue, after which it is necessary to press eco letaher on foam rubber with backing to the surface and fix for a short time. Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco letaher on foam rubber with backing. Final bonding with this heat-resistant glue occurs within 24 hours. You can don't apply glue to the eco-leather itself if it already adheres well.
    • If you have chosen one of the aerosol glues, you need to spray it on the work surface and on the wrong side of the eco leather on foam rubber with backing, wait until the solvent partially disappears from the adhesive, then press the eco leather on foam backing to the surface and fix it for a short time. Final gluing with aerosol adhesives occurs within 24 hours. Attention, with a 100% guarantee, eco leather can be glued to the working surface only with Scotch-Weld 3M 90. The rest of the aerosol glues given above are also used to gluing microfiber eco leather, but for some reason, there are sometimes complaints about them. You decide.
    • If you have chosen one of the thermally activated glues Molecule Thermo Active, KLEYBERG 900-И, Poligrip, SAR 306, SAR 30-E, then gluing the eco leather on foam rubber is a little more complicated, and require a hairdryer. The glue is applied to both surfaces either with a spray gun from a distance of at least 30-40 cm (nozzle diameter 2.5-3 mm, air pressure at least 4 atmospheres), or with a thin layer of a brush (roller). Glue is applied on both glued surfaces evenly, without gaps. Do not allow glue to impregnate the inside of eco leather on foam rubber. The glue is applied in at least five layers. Each subsequent layer is applied after the previous layer has dried. The drying time of each layer is 20-30 minutes. After the last layer has dried, eco leather on foam rubber (with an adhesive layer applied to it) is laid on the work surface, which is also covered with an adhesive layer. Since the glue on the work surface and on eco leather on foam rubber does not have stickiness after drying, the two surfaces do not stick together when applied to each other. This is very convenient, since it allows you to decompose the material with the glue layer applied on it onto a working surface covered with glue and to anticipate and plan a step-by-step gluing process. After the material is decomposed, the glue on the work surface and on eco leather on foam rubber is activated (heated) in small sections by an industrial (professional) hairdryer until sticky, after which the material is smoothed and pressed to the work surface. It is necessary to press eco leather until the glue temperature drops and both surfaces stick together. To activate the glue, you must either directly heat the glue from the wrong side of the eco leather on foam rubber, or heat the eco leather on the front side. In difficult places eco leather on foam rubber is additionally heated by a hairdryer. Thus, site after site, bonding occurs over the entire surface. This is the convenience of step-by-step gluing using thermally activated glue. The distance from the nozzle of the hair dryer to the adhesive layer and the temperature are selected so as not to burn eco leather and at the same time activate (thin) the glue. To avoid burns, use a protective glove. Special places subjected to load are additionally treated with glue. When applying glue in thin layers, the glue does not give thickness. If you find a non-glued place, the glue allows you to fix this defect by re-heating this area.
  • We recommend that you try first sticking a small piece of eco leather on foam rubber with backing, gain some experience, and then go to the rest. The essence of gluing eco leather on foam rubber with backing is that the glue is slightly absorbed into the eco leathers foam rubber backing and on the working surface, then, after pressing the eco leather to the working surface, two surfaces are firmly bonded. Before the gluing, carefully read the instructions for using the appropriate glue on our website in the section glue.

ECO LEATHER CARE:

  • NO DRY CLEANING for eco leather! It will start to peel off immediately after dry cleaning or a little later. The front polyurethane layer is destroyed by dry cleaning. Dry cleaning also breaks the bond of the front polyurethane layer with the base.
  • To remove common pollutions (tea, coffee, juice, dust, etc.), the eco leather surface must be treated with a moistened soft cloth with light movements, then be sure to wipe it dry. In the same way dust and dirt are removed. If it was not possible to get rid of the pollution immediately, the use of 40-50% alcohol-water solution or ammonia is allowed.
  • Over time, leather upholstery, when exposed to sunlight, humidity, temperature, and other effects, dries out, loses its elasticity and appearance, wipes, stretches, or begins to tear at the seams, and cracks form on the surface of the leather that become clogged with dirt. To avoid such troubles and to preserve the integrity of eco leather as long as possible, it is necessary to use a special tool for eco leather care - conditioner for eco leather. It is necessary to process eco leather with such a tool once a month in the summer and once every three months in the winter.
  • If the surface is covered with snow-white eco leather or eco leather of light tones, then for better protection from pollution (for example, jeans can “tint” the leather upholstery of the furniture with a dye that cannot be removed), it is recommended to use special water and dirt-repellent impregnations for eco leather, textiles and high-tech materials. These funds can be purchased at almost any supermarket, in stores selling shoes and leather clothes. When choosing an impregnation, be sure to read the instructions for use. If there is an indication "not use for PU" (do not use for polyurethane coatings), then this product is not suitable.
  • It is strongly discouraged to leave the eco leather wet after the care and cleaning procedures. This will lead to a partial destruction of the polymer film, and, as a consequence, to premature loss of the original appearance of eco leather.
  • Today more and more eco leather in the car interior is wiped with wet wipes. This can never be done! The composition of the solution with which the wipes are moistened includes components that destroy eco leather. It is enough to wipe the eco leather with a soft cloth moistened with clean water.
  • Attention! Do not use solvents and abrasive cleaners to clean eco leather !!!

NECESSARY FOR UPHOLSTERY WITH ECO LEATHER:

NEEDED FOR RESALE ECO LEATHER:

$12.54
price per lin. meter
ширина 1,4м
$8.36
price per lin. meter
Sale in linear meters
Sale in rolls
$158.77
price per small roll
20пог.м
$300.83
price per roll
40пог.м
Eco leather on glue Oregon BLACK STRONG width 1,4m thickness 1mm

Eco leather on glue Oregon
BLACK STRONG width 1,4m thickness 1mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber 5mm and mesh

this item is also available: without glue on foam rubber 3mm and 5mm and spunbond

this item is also available: without glue with perforation on foam rubber 5mm and mesh

this item is also available: without glue with perforation on foam rubber 3mm and 5mm and spunbond

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 1mm, manufacturer China
  • сcomposition: cotton 30%, polyurethane 70%
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin.m or 28 sq.m
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$11.51
price per lin. meter
ширина 1,4м
$8.77
price per lin. meter
Sale in linear meters
Sale in rolls
$83.29
price per small roll
10пог.м
$157.81
price per roll
20пог.м
Catalog of eco leather BLACK in canvas (without eco microfiber leather)
$4.11 $2.47
price per piece
23 образца

Catalog of eco leather BLACK in canvas
(without eco microfiber leather)

available in stock

catalog updated on March 30th by senior operator Albert

sample size 150х100mm, 26 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
Oregon SLIM BLACK, with perforation - 2 samples
Oregon BLACK STRONG with perforation - 2 samples
Oregon BLACK SUPER STRONG, with perforation - 2 samples
Oregon SLIM BLACK NEW, with perforation - 2 samples
Vinyl eco leather Oregon STRETCH BLACK - 1 sample
Alba Aries №501 BLACK, Alba Rustika №501 BLACK, Alba Dollaro №501 BLACK,
Alba Lak №501 BLACK - 4 samples
Art-Vision 1 №101 BLACK, Art-Vision 2 №201 BLACK, Art-Vision 2 №201M BLACK - 3 samples
VEGA BLACK - 1 sample, SPACE BLACK - 1 sample,
Companion Dakota 2101 BLACK - 1 sample
Companion Dakota R 2101 BLACK - 1 sample
Companion NEW Dakota BLACK and Companion NEW Dakota BLACK with perforation - 2 samples
Companion NEW Nappa BLACK and Companion NEW Nappa BLACK with perforation - 2 samples
Oregon Nappa BLACK, with perforation - 2 samples

Catalog of Eco leather Oregon BLACK on foam rubber
$5.48 $3.29
price per piece
20 образцов

Catalog of Eco leather Oregon BLACK on foam rubber

available in stock

catalog updated on March 30th by senior operator Albert

sample size 150х100mm, 20 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
Oregon BLACK SUPER STRONG on foam rubber, on foam rubber 3mm, with perforation on foam rubber and with perforation on foam rubber 3mm - 4 samples
Oregon BLACK STRONG on foam rubber, on foam rubber and mesh, on foam rubber 3mm, with perforation on foam rubber, with perforation on foam rubber and mesh, with perforation on foam rubber 3mm - 6 samples
Oregon SLIM BLACK on foam rubber, on foam rubber and mesh, on foam rubber 3mm, with perforation on foam rubber, with perforation on foam rubber and mesh, with perforation on foam rubber 3mm - 6 samples
Oregon SLIM BLACK NEW on foam rubber, on foam rubber 3mm, with perforation on foam rubber 3mm, with perforation on foam rubber 5mm - 4 samples

Catalog of Eco leather Oregon SLIM in canvas
$6.85 $4.11
price per piece
60 образцов

Catalog of Eco leather Oregon SLIM in canvas

available in stock

the catalog was updated on May 22 by the operator Danil

sample size 100х150mm, 65 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon SLIM without perforation - 35 samples
co leather Oregon SLIM with perforation - 27 samples
vinyl leather Oregon STRETCH BLACK - 1 sample
eco leather NAPPA without perforation - 1 sample
eco leather NAPPA with perforation - 1 sample

Catalog of Eco leather Oregon STRONG in canvas
$4.11 $2.47
price per piece
24 образца

Catalog of Eco leather Oregon STRONG in canvas

available in stock

catalog updated March 16 by senior operator Albert

sample size 100х150mm, 34 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon STRONG without perforation - 13 samples
eco leather Oregon STRONG with perforation - 13 оsamples
eco leather Oregon SUPER STRONG without perforation - 4 samples
eco leather Oregon SUPER STRONG with perforation - 4 samples

Catalog of Eco leather Oregon SLIM without perforation on foam rubber 3mm and backing
$5.48 $3.29
price per piece
33 образца

Catalog of Eco leather Oregon SLIM
without perforation on foam rubber 3mm and backing

available in stock

the catalog was updated on July 24 by the operator Alexey

sample size 100х150mm, 28 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon SLIM without perforation on foam rubber 3mm and backing - 28 samples

Catalog of eco leather Oregon SLIM-1 without perforation on foam rubber 5mm and backing
$4.11 $2.47
price per piece
17 образцов

Catalog of Eco leather Oregon SLIM-1
without perforation on foam rubber 5mm and backing

available in stock

the catalog was updated on April 6 by the operator Vladislav

sample size 100х150mm, 20 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog contains eco leather Oregon SLIM on foam rubber 5mm and backing in the following colors:
black (on spunbond and mesh), black NEW, dark gray, grey, light grey, light beige, beige, beige-gray, cappuccino, creamy beige, creamy, ivory, silver glitter, wenge glitter, chocolate, light chocolate, brown, dark brown - 19 samples
Eco leather on foam rubber 5mm and spunbond NAPPA BLACK width 1,4m - 1 sample

Catalog of Eco leather Oregon SLIM-2 without perforation on foam rubber 5mm and backing
$4.11 $2.47
price per piece
18 образцов

Catalog of Eco leather Oregon SLIM-2
without perforation on foam rubber 5mm and backing

available in stock

the catalog was updated on May 22 by the operator Danil

sample size 100х150mm, 17 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog contains eco leather Oregon SLIM on foam rubber 5mm and backing in the following colors:
gold glitter, white, menthol, sky blue, blue, dark blue, dark purple, yelloe, light green, dark turquoise, green, dark green, orange, red, red glitter, dark red, burgundy - 17 samples

Catalog of Eco leather Oregon STRONG without perforation on foam rubber 5mm with backing
$2.74 $1.65
price per piece
12 образцов

Catalog of Eco leather Oregon STRONG
without perforation on foam rubber 5mm with backing

available in dtock

sample size 100х150mm, 12 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon STRONG without perforation on foam rubber 5mm with backing - 12 samples

Catalog of Eco leather Oregon SLIM with perforation on foam rubber 3mm and backing
$4.11 $2.47
price per piece
22 образца

Catalog of Eco leather Oregon SLIM
with perforation on foam rubber 3mm and backing

available in stock

the catalog was updated on April 6 by the operator Vladislav

sample size 100х150mm, 25 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon SLIM with perforation on foam rubber 3mm and backing - 24 samples
eco leather Oregon NAPPA with perforation on foam rubber 3mm and backing - 1 sample

Catalog of Eco leather Oregon SLIM with perforation on foam rubber 5mm and backing
$5.48 $3.29
price per piece
25 образцов

Catalog of Eco leather Oregon SLIM
with perforation on foam rubber 5mm and backing

available in stock

the catalog was updated on April 6 by the operator Vladislav

sample size 100х150mm, 29 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon SLIM with perforation on foam rubber 5mm and backing - 28 samples
eco leather Oregon NAPPA with perforation on foam rubber 5mm and backing - 1 sample

Catalog of Eco leather Oregon STRONG with perforation on foam rubber with backing
$2.74 $1.65
price per piece
12 образцов

Catalog of Eco leather Oregon STRONG
with perforation on foam rubber with backing

available in stock

the catalog was updated on December 20 by the operator Vladislav

sample size 100х150mm, 12 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
catalog of Eco leather Oregon STRONG with perforation on foam rubber with backing - 12 samples

Catalog of Eco leather Oregon STRONG on foam rubber 3mm and backing
$4.11 $2.47
price per piece
23 образца

Catalog of Eco leather Oregon STRONG
on foam rubber 3mm and backing

available in stock

catalog updated March 16 by senior operator Albert

sample size 100х150mm, 26 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon STRONG without perforation on foam rubber 3mm and backing - 13 samples
eco leather Oregon STRONG with perforation on foam rubber 3mm and backing - 13 samples

Catalog of Eco leather Oregon STRONG on foam rubber 5mm and backing
$5.48 $3.29
price per piece
26 образцов

Catalog of Eco leather Oregon STRONG
on foam rubber 5mm and backing

available in stock

catalog updated March 16 by senior operator Albert

sample size 100х150mm, 28 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon STRONG without perforation on foam rubber 5mm and backing - 14 samples
eco leather Oregon STRONG with perforation on foam rubber 5mm and backing - 14 samples

Catalog of Eco leather Oregon on glue
$4.11 $2.47
price per piece
16 образцов

Catalog of Eco leather Oregon on glue

availalble in stock

the catalog was updated on August 30 by the operator Timur

sample size 100х150mm, 10 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon SLIM on glue - 8 samples
eco leather Oregon STRONG on glue BLACK - 1 sample
vinyl leather Oregon STRETCHED on glue BLACK NEW - 1 sample