Pixel.Mail.Ru
contact us
ru en
+7 495 249-29-39
working around-the-clock

Eco leather Oregon on glue - buy online

Eco leather on glue Oregon BLACK width 1,4m thickness 0,85mm

Eco leather on glue Oregon
BLACK width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber 5mm and mesh

this item is also available: without glue on foam rubber 3mm and 5mm and spunbond

this item is also available: without glue with perforation on foam rubber 5mm and mesh

this item is also available: without glue with perforation on foam rubber 3mm and 5mm and spunbond

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.69
price per lin. meter
ширина 1,4м
$7.95
price per lin. meter
Sale in linear meters
Sale in rolls
$75.48
price per small roll
10пог.м
$143.02
price per roll
20пог.м
Eco leather on glue Oregon BLACK NEW width 1,4m thickness 0,85mm

Eco leather on glue Oregon
BLACK NEW width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber 3mm and 5mm and spunbond

this item is also available: without glue with perforation on foam rubber 3mm and 5mm and spunbond

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Vinyl eco leather on glue Oregon STRETCH BLACK NEW width 1,35m thickness 0,65mm

Vinyl eco leather on glue Oregon STRETCH BLACK NEW
width 1,35m thickness 0,65mm

available 6,6 lin.m, arrival is expected in mid-June

differs from ordinary black in a more pronounced structure

this item is also available: without glue

SUMMARY OF VINYL ECO LEATHER OREGON STRETCH ON GLUE:

  • roll width 1,35m, material thickness 0,65mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin.m or 28 sq.m
  • LITTLE STRETCHES ALONG THE ROLL
  • STRETCHES VERY GOOD ON ROLL WIDTH!!!
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +80 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF VINYL ECO LEATHER OREGON ON GLUE:

  • Vinyl eco leather Oregon STRETCH - this is an artificial leather, which is vinyl leather with the addition of polyurethane and an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85°C, has high adhesion.

USAGE OF VINYL ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used for upholstering various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Eco leather Oregon on glue is not used for seat upholstery. For these purposes eco leather on canvas or eco leather on foam rubber with backin is used.
  • It is used for upholstering any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING VINYL ECO LEATHER OREGON ON GLUE:

  • he surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR VINYL ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH VINYL ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE VINYL ECO LEATHER OREGON ON GLUE:

$10.69
price per lin. meter
ширина 1,35м
$7.95
price per lin. meter
Sale in linear meters
Sale in rolls
$75.48
price per small roll
10пог.м
$143.02
price per roll
20пог.м
Eco leather on glue Oregon BLACK STRONG width 1,4m thickness 1mm

Eco leather on glue Oregon
BLACK STRONG width 1,4m thickness 1mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber 5mm and mesh

this item is also available: without glue on foam rubber 3mm and 5mm and spunbond

this item is also available: without glue with perforation on foam rubber 5mm and mesh

this item is also available: without glue with perforation on foam rubber 3mm and 5mm and spunbond

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 1mm, manufacturer China
  • сcomposition: cotton 30%, polyurethane 70%
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin.m or 28 sq.m
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$11.51
price per lin. meter
ширина 1,4м
$8.77
price per lin. meter
Sale in linear meters
Sale in rolls
$83.29
price per small roll
10пог.м
$157.81
price per roll
20пог.м
Eco leather on glue Oregon DARK GREY width 1,4m thickness 0,85mm

Eco leather on glue Oregon
DARK GREY width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

 

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Eco leather on glue Oregon LIGHT GREY width 1,4m thickness 0,85mm

Eco leather on glue Oregon
LIGHT GREY width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

 

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Eco leather on glue Oregon WHITE width 1,4m thickness 0,85mm

Eco leather on glue Oregon
WHITE width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Eco leather on glue Oregon IVORY width 1,4m thickness 0,85mm

Eco leather on glue Oregon
IVORY width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.42
price per lin. meter
ширина 1,4м
$7.68
price per lin. meter
Sale in linear meters
Sale in rolls
$72.88
price per small roll
10пог.м
$138.09
price per roll
20пог.м
Eco leather on glue Oregon CREAM width 1,4m thickness 0,85mm

Eco leather on glue Oregon
CREAM width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Eco leather on glue Oregon BEIGE width 1,4m thickness 0,85mm

Eco leather on glue Oregon
BEIGE width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Eco leather on glue Oregon RED width 1,4m thickness 0,85mm

Eco leather on glue Oregon
RED width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.42 $5.21
price per lin. meter
ширина 1,4м
$7.68 $3.84
price per lin. meter
Sale in linear meters
Sale in rolls
$72.88 $36.44
price per small roll
10пог.м
$138.09 $69.05
price per roll
20пог.м
Eco leather on glue Oregon BROWN width 1,4m thickness 0,85mm

Eco leather on glue Oregon
BROWN width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

 

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.42 $5.21
price per lin. meter
ширина 1,4м
$7.68 $3.84
price per lin. meter
Sale in linear meters
Sale in rolls
$72.88 $36.44
price per small roll
10пог.м
$138.09 $69.05
price per roll
20пог.м
Eco leather on glue Oregon DARK BROWN width 1,4m thickness 0,85mm

Eco leather on glue Oregon
DARK BROWN width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

 

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.42 $5.21
price per lin. meter
ширина 1,4м
$7.68 $3.84
price per lin. meter
Sale in linear meters
Sale in rolls
$72.88 $36.44
price per small roll
10пог.м
$138.09 $69.05
price per roll
20пог.м
Eco leather on glue Oregon CHOCOLATE width 1,4m thickness 0,85mm

Eco leather on glue Oregon
CHOCOLATE width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

 

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83
price per lin. meter
ширина 1,4м
$8.09
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79
price per small roll
10пог.м
$145.48
price per roll
20пог.м
Eco leather on glue Oregon WENGE GLITTER width 1,4m thickness 0,85mm

Eco leather on glue Oregon
WENGE GLITTER width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue on foam rubber and spunbond

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.55 $5.28
price per lin. meter
ширина 1,4м
$7.81 $3.91
price per lin. meter
Sale in linear meters
Sale in rolls
$74.18 $37.1
price per small roll
10пог.м
$140.55 $70.28
price per roll
20пог.м
Eco leather on glue Oregon BLUE width 1,4m thickness 0,85mm

Eco leather on glue Oregon
BLUE width 1,4m thickness 0,85mm

available in stock

this item is also available: without glue

this item is also available: without glue with perforation

this item is also available: without glue on foam rubber and spunbond 3mm and 5mm

this item is also available: without glue with perforation on foam rubber and spunbond 3mm and 5mm

SUMMARY OF ECO LEATHER OREGON ON GLUE WIDTH 1,4m:

  • roll width 1,4m, material thickness 0,85mm, manufacturer China
  • for convenience we cut rolls of 10 lin.m or 14 sq.m
  • factory rolls are 20 lin. m or 28 sq.m
  • stretches slightly laterally
  • self-adhesive decorative material for auto
  • German glue is applied to the eco leather on Italian equipment
  • adhesive backing - siliconized paper with a density of 90 g/m2
  • used at temperatures from -35 to +70 °С
  • sold for a cut in linear meters in multiples of 10cm and in rolls; minimum order 1 linear meter; the material you ordered is wound on a round tube before shipment and carefully packed in several layers of air-bubble film

DESCRIPTION OF ECO LEATHER OREGON ON GLUE:

  • Eco leather Oregon on glue is eco leather Oregon with an adhesive layer applied to it. The glue surface is covered with siliconized protective paper. The applied glue does not in any way affect the stretch of eco leather, it stretches perfectly along with it.
  • The eco leather is coated with high-quality glue based on synthetic rubber by the melt method on special high-tech equipment. Such glue has constant stickiness and elasticity, it does not dry out over time, is absolutely not afraid of moisture, withstands temperatures up to + 85 ° C, has high adhesion.

USAGE OF ECO LEATHER OREGON ON GLUE:

  • It is used for upholstering door cards, podiums, panel elements, acoustic shelves and other plastic parts of the car interior for the purpose of tuning the interior, decorative covering, renewing worn plastic.
  • It is used to upholstery various plastic parts of the interior of a minibus, bus, truck cab, etc. to renew worn-out plastic.
  • Ecp leather Oregon on glue is not used for car seats upholstery. For these purposes is used eco leather on canvas or eco leather on foam rubber with backing.
  • It is used for upholstery any items.
  • It is used in printing and advertising for banner covers, book bindings.
  • It is used in the furniture industry for decorative banner of facades.

GLUING ECO LEATHER OREGON ON GLUE:

  • The surface must be dry and clean, we recommend to degrease the plastic parts.
  • After patterning, you need to partially remove the adhesive paper. Do not remove the whole of it at once, otherwise an unpleasant situation may occur when the eco leather on the glue, touching the glue side, can stick together so that it cannot be separated back, since the glue has very high adhesion.
  • To achieve the best gluing effect, we highly recommend heating the glued side of eco leather with a hairdryer. Any hair dryer, for construction or for hair, is suitable, the optimum temperature for the glue is from +30 to +40° С. Be careful when working with a construction hairdryer, it gives out a very high temperature, and it can easily damage the eco leather, when warming up, keep it at a distance of 40-50cm.
  • If the work is carried out at a temperature below room temperature, then we also recommend that the glued part be slightly warmed up as it is glued. Heating will take a little time, but the effect of this work will be very significant. When heated, the glue instantly adheres to the glued surface.
  • For gluing eco leather on glue on porous, rough, fleecy and with complex bends, we recommend to additionally apply Molecule Heat-resistant glue to the work surface before gluing for more reliable adhesion. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.
  • In the case of gluing eco leather on glue basis on the ceiling lining and side pillars of the passenger compartment, we recommend that you always apply Molecule Heat-resistant glue to the surface to be glued to prevent the eco leather from peeling off the glue from the working surface.

GLUE FOR ECO LEATHER OREGON ON ADHESIVE BASIS:

  • If the surface on which the eco leather with an adhesive layer is glued is porous, rough, fleecy and has complex bends, then such a surface must be additionally treated with glue Molecule Heat-resistant. The glue is applied in one or two layers: if the surface is porous and absorbs the glue well, then you need to apply two layers with a break of 20-30 minutes; if the surface does not absorb glue (for example, plastic), then one layer of glue is sufficient. After applying the Heat-resistant Molecule glue to the work surface, you need to wait 15-40 minutes, and when the glue, when touched with your hand, stops strongly sticking to the hand and remains on the skin, you can start gluing the eco leather on top of it with an adhesive base.

NEEDED FOR UPHOLSTERY WITH ECO LEATHER OREGON ON GLUE:

NEEDED FOR RESALE ECO LEATHER OREGON ON GLUE:

$10.83 $5.42
price per lin. meter
ширина 1,4м
$8.09 $4.05
price per lin. meter
Sale in linear meters
Sale in rolls
$76.79 $38.4
price per small roll
10пог.м
$145.48 $72.74
price per roll
20пог.м
Catalog of Eco leather Oregon on glue
$4.11 $2.47
price per piece
16 образцов

Catalog of Eco leather Oregon on glue

availalble in stock

the catalog was updated on August 30 by the operator Timur

sample size 100х150mm, 10 samples, zipped, signed

the catalog is shipped well-packed in a bubble wrap and a box

there is no information on the catalog (name, phone number, address) about the company www.SHYMKA.ru

With the help of the catalog, you can pick up the material you need live. Also, the catalog allows you to sell materials to order. Just drop the catalog into the shopping cart and place an order with delivery to your city. After receiving the catalog, select the material you need and place your order in the same way.

The catalog includes the following types of eco leather:
eco leather Oregon SLIM on glue - 8 samples
eco leather Oregon STRONG on glue BLACK - 1 sample
vinyl leather Oregon STRETCHED on glue BLACK NEW - 1 sample